| Subject | Text |
| looking for SM for Samsung RL-34EGSW frigo | Hey! I'm looking for SM for a samsung refrigerator -> RL-34EGSW with LED display. Unfortunately m |
| Reset to factory settings - CRT Toshiba TV to fix problem? | Good Day,
I'm trying to give a Xmas present to a family member. He lives in the country and has per |
|
|
| factory settings | How do you put the Sanyo CE27LD3 - B back to the factory settings?
I have just bought this set and |
| I messed up the service menu settings too duhhh!! | Hi! my name is Boris, I live in france ...
I had to post on this forum because the answear doesn't |
| JVC AV28WT4EKS service settings | I have a friend that has messed around with the service settings on his tv i was wondering if there |
| default service settings for HP P910 | I need the default service settings from the service menu of HP P910. Please, if someone has them be |
| factory settings pdp 433 pioneer plasma | Service manual of my pioneer 433 plasma
sorry cant give rapidshare address of my service guide it |
| Flat Flex Cable Jumper | Try Molex Premo-Flex. Available from Digi-Key:
WM10201-ND
21020-0097
CABLE FLAT FLEX 2" |
| Re: i need dump for citroen jumper 2,8 hdi disable immo I | [quote="axisss"]0000:11 06 20 01 00 00 55 AA 55 AA 55 AA 55 AA 55 AA
0010:55 AA 55 AA FA 05 55 AA 3 |
| Philips Projection TV 43PP8420 settings | Hi,
I have the Philips projection the model 43PP8420, and there was a problem where I got a beep fr |
| Re: PANASONIC KX-F90 hidden settings? | does any one know how to change the program setting of panasonic fax kx-f90 |
| Re: PANASONIC KX-F90 hidden settings? | [quote:00fde36fdb="[email protected]"]Please, let me know anybody knowing how to force this fax machine |
| factory settings in service mode | By mistak I am changed the factory settings in service mode
So please tell me the detail factory se |
| i need dump for citroen jumper 2,8 hdi disable immo I | 0000:11 06 20 01 00 00 55 AA 55 AA 55 AA 55 AA 55 AA
0010:55 AA 55 AA FA 05 55 AA 3C C3 55 AA 55 AA |
| reset montgomery ward signature 2000 tv to factory settings | I Could not find a manual anywhere for my tv so I though I would ask a specific question. I Accident |
| PANASONIC KX-F90 hidden settings? | Please, let me know anybody knowing how to force this fax machine to answer the incoming call after |
| i need dump for citroen jumper 2,8 hdi disable immo I | 0000:11 06 20 01 00 00 55 AA 55 AA 55 AA 55 AA 55 AA
0010:55 AA 55 AA FA 05 55 AA 3C C3 55 AA 55 AA |
|
|
| how to set default settings | i am using onida ky rock 21 inch tv.unfortunately i changed basic colour ratio in service menu how t |
| [quote:43ae0d504e="jts1957"]I'd confirm that all power supply secondaries are trying to come up and |
| EASY ADD YOUR SLAVE HDD | Easy, remove the jumper installed on your Seagate hdd, connect the WD on the extreme connector and t |
| My current status for IC805 Pin1 reads 13.69volt and pin 3 reads 11.95volt,with J115,J174 jumper wir |
| [quote:513a5ba811="vtech"]..sorry I see, it is the LCxx series made by Sanyo.
Forgot to mention |
| Samsung 3297hf | I really need help guys... I bought a Samsung Tantus HDTV ready television and wanted to try to twea |
| reply | CHECK FOR FOLLOWING
1.FIRST check srvice menu settings.
2.check tunner. open up and see wheth |
| soldering always getting a dull finish, dry ? | hi,
i bought a soldering atation and doing a bit of soldering work on a curcuit board,\
howeve |
| Mitsu 35" | We also have raining blue streaks with sound OK on our 35"... 12 years old. Found this on another s |
| I'd have to say it is somewhat unusual to pop 5 of them, but it is possible.(just make sure that you |
| Service Modes | Manufacturer Model Chassis Product Mode Enter
Akai CT-2119 CTV Test Mode
Simultaneous press + & |
| some tips | Hi did you check menu settings of your tv? ok try press3x channel if does not off... if not, check y |
| Toshiba Rear projection TV, control panel/remote not working | Hi everyone,
I have a Toshiba Rear projection TV, model 42wh18b, it is 3 years old and we never h |